2007年3月31日 星期六

面削りバイトwww.tool-tool.com

Bewise Inc. www.tool-tool.com

Reference source from the internet.

【技術の名称】
 1-1-3a コレソフバイトのコーナ部形状

【技術内容】
 工作機械が剛性を欠く場合は、びびりを発生し、切削不能となる。被削材種、切削馬力の大きさ、工作機械の剛性等によっては、横切刃角(Cs)を大きくして切削したほうが良い場合がある。
 この種の代表的なバイトとしてコレソフバイトがある。コレソフバイトを図1に、コーナ部形状を図2に示す。このバイトは高速、高送り切削を可能にする。なおこのバイトにはノーズ半径(rn)の代わりに直線さらえ刃を設けている。そのため仕上げ面粗さも向上する。

【図】
 図1 コレソフバイト
コレソフバイト
 出典:「実用切削加工法」、(1980年)、藤村善雄著、共立出版社発行、90頁 図 5.8 コレソフバイト

 図2 コーナ部形状
コーナ部形状
 出典:「実用切削加工法」、(1980年)、藤村善雄著、共立出版社発行、90頁 図 5.9 コーナー部形状

【応用分野】
 旋削加工

【出典/参考資料】
 「実用切削加工法」、(1980年)、藤村善雄著、共立出版社発行、90頁



【技術分類】
 1-1 外径旋削バイト

【技術の名称】
 1-1-3 Ti-3Al-8V-6Cr-4Mo-4Zrの旋削加工(4-2-1、4-5-1、4-5-3、6-1-2、7-2-3、8-2-3)

【技術内容】
 β組織のチタン合金Ti-3Al-8V-6Cr-4Mo-4Zr(記号Ti-B、βCチタン合金と記述)の旋削加工時における加工特性と被削性を調べ、安定的な加工法を検討した。
 超硬K10種、焼結ダイヤモンド、および単結晶ダイヤモンド工具を用い、湿式丸削りの旋削実験を行った。切削条件を図1に示す。その結果、つぎの結論を得た。
 (1)βCチタン合金はTi-6Al-4Vに比べ、切削速度30~150m/minの範囲で切削温度は約100℃低い。切削抵抗は90m/min以上では同等かわずかに高いが、60m/min以下では急激に上昇する。
 (2)βCチタン合金を超硬工具で切削したときの工具寿命は、Ti-6Al-4V切削時の約1/2~1/10と悪い。これは、被削材の 溶着が激しいためである。溶着を軽減するには工具すくい角をポジにし横切れ刃角の大きくした工具形状が良い(図2)。この形状であれば、超硬工具でも 120m/minでの切削が可能である(図3)。
 (3)焼結ダイヤモンド工具でも溶着による工具摩耗が著しい。ただし、超硬工具と同様の工具形状とすれば超硬工具より若干高い切削速度が可能である。
 (4)βCチタン合金のように被削材の溶着による工具損傷が激しい場合には、被削材から工具が離脱する角度を変更するだけで工具寿命を 大幅に改善できる(図4)。このときの離脱角度はθ=45°以下が適切である。被削材入口形状をテーパ形状にすることでも同様の効果が得られ、付着物の脱 落による工具損傷を防ぐことができる。

【図】
 図1 切削条件
切削条件
 出典:「Ti-3Al-8V-6Cr-4Mo-4Zrの旋削加工」、「精密工学会誌 61巻 7号」、(1995年)、臼杵年、鳴瀧則彦、山根八州男著、精密工学会発行、1001頁 Table1 Cutting conditions

 図2 β組織チタン合金旋削時の超硬工具摩耗に及ぼすすくい角の影響
β組織チタン合金旋削時の超硬工具摩耗に及ぼすすくい角の影響
 出典:「Ti-3Al-8V-6Cr-4Mo-4Zrの旋削加工」、「精密工学会誌 61巻 7号」、(1995年)、臼杵年、鳴瀧則 彦、山根八州男、精密工学会著、1003頁 Fig.6 Effect of side rake angle on tool wear of carbide tool in machining of beta-titanium alloy

 図3 β組織チタン合金旋削時の超硬工具摩耗に及ぼす横切れ刃角の影響
β組織チタン合金旋削時の超硬工具摩耗に及ぼす横切れ刃角の影響
 出典:「Ti-3Al-8V-6Cr-4Mo-4Zrの旋削加工」、「精密工学会誌 61巻 7号」、(1995年)、臼杵年、鳴瀧則 彦、山根八州男著、精密工学会発行、1003頁 Fig.7 Effect of side cutting edge angle on tool wear of carbide tool in machining of beta-titanium alloy

 図4 β組織チタン合金旋削時の工具摩耗に及ぼす工具経路の影響
β組織チタン合金旋削時の工具摩耗に及ぼす工具経路の影響
 出典:「Ti-3Al-8V-6Cr-4Mo-4Zrの旋削加工」、「精密工学会誌 61巻 7号」、(1995年)、臼杵年、鳴瀧則 彦、山根八州男著、精密工学会発行、1004頁 Fig.9 Effect of tool path on tool wear in machining of beta-titanium alloy

【応用分野】
 β組織チタン合金の旋削加工

【出典/参考資料】
 「精密工学会誌 61巻 7号」、(1995年7月)、臼杵年、鳴瀧則彦、山根八州男著、精密工学会発行、1001頁~1005頁

Welcome to BW tool world! We are an experienced tool maker specialized in cutting tools. We focus on what you need and endeavor to research the best cutter to satisfy users’ demand. Our customers involve wide range of industries, like mold & die, aerospace, electronic, machinery, ,,,etc. We are professional expert in cutting field. We would like to solve every problem from you. Please feel free to contact us, it’s our pleasure to serve for you. BW product including: utting toolHSS Cutting toolCarbide end millsCarbide cutting toolNAS Cutting toolCarbide end millAerospace cutting toolCarbide drillHigh speed steelMilling cutterCore drillTaperd end millsMetric end millsMiniature end millsPilot reamerElectronics cutterStep drillMetal cutting sawDouble margin drillGun barrelAngle milling cutterCarbide burrsCarbide tipped cutterChamfering toolIC card engraving cutterSide cutterNAS toolDIN toolSpecial toolMetal slitting sawsShell end millsSide and face milling cuttersSide chip clearance sawsLong end millsStub roughing end millsDovetail milling cuttersCarbide slot drillsCarbide torus cuttersAngeled carbide end millsCarbide torus cuttersCarbide ball-noseed slot drillsMould cutterTool manufacturer.

Bewise Inc. www.tool-tool.com

沒有留言: