2011年1月19日 星期三

Cerium www.tool-tool.com

Cerium ( /ˈsɪəriəm/) is a chemical element with the symbol Ce and atomic number 58. It is a soft, silvery, ductile metal which easily oxidizes in air. Cerium was named after the dwarf planet Ceres (itself named for the Roman goddess of agriculture). Cerium is the most abundant of the rare earth elements, making up about 0.0046% of the Earth's crust by weight. It is found in a number of minerals, the most important being monazite and bastnasite. Commercial applications of cerium are numerous. They include catalysts, additives to fuel to reduce emissions and to glass and enamels to change their color. Cerium oxide is an important component of glass polishing powders and phosphors used in screens and fluorescent lamps.



  • 1 Characteristics
    • 1.1 Physical properties
    • 1.2 Chemical properties
    • 1.3 Compounds
    • 1.4 Isotopes
  • 2 History
  • 3 Occurrence
  • 4 Production
  • 5 Applications
  • 6 Precautions
  • 7 References
  • 8 External links

[edit] Characteristics

[edit] Physical properties

Cerium is a silvery metal, belonging to the lanthanide group. It resembles iron in color and luster, but is soft, and both malleable and ductile. Cerium has the second-longest liquid range of any element: 2648 C° (795 °C to 3443 °C) or 4766 F° (1463 °F to 6229 °F). (Thorium has the longest liquid range.)

Phase diagram of cerium

Cerium is especially interesting because of its variable electronic structure. The energy of the inner 4f level is nearly the same as that of the outer or valence electrons, and only small energy is required to change the relative occupancy of these electronic levels. This gives rise to dual valency states. For example, a volume change of about 10% occurs when cerium is subjected to high pressures or low temperatures. It appears that the valence changes from about 3 to 4 when it is cooled or compressed. The low temperature behavior of cerium is complex. Four allotropic modifications are thought to exist: cerium at room temperature and at atmospheric pressure is known as γ cerium. Upon cooling to –16 °C, γ cerium changes to β cerium. The remaining γ cerium starts to change to α cerium when cooled to –172 °C, and the transformation is complete at –269 °C. α Cerium has a density of 8.16; δ cerium exists above 726 °C. At atmospheric pressure, liquid cerium is more dense than its solid form at the melting point.[3][4][5]

[edit] Chemical properties

Cerium metal tarnishes slowly in air and burns readily at 150 °C to form cerium(IV) oxide:

Ce + O2 → CeO2

Cerium is quite electropositive and reacts slowly with cold water and quite quickly with hot water to form cerium hydroxide:

2 Ce (s) + 6 H2O (l) → 2 Ce(OH)3 (aq) + 3 H2 (g)

Cerium metal reacts with all the halogens:

2 Ce (s) + 3 F2 (g) → 2 CeF3 (s) [white]2 Ce (s) + 3 Cl2 (g) → 2 CeCl3 (s) [white]2 Ce (s) + 3 Br2 (g) → 2 CeBr3 (s) [white]2 Ce (s) + 3 I2 (g) → 2 CeI3 (s) [yellow]

Cerium dissolves readily in dilute sulfuric acid to form solutions containing the colorless Ce(III) ions, which exist as a [Ce(OH2)9]3+ complexes:[6]

2 Ce (s) + 3 H2SO4 (aq) → 2 Ce3+ (aq) + 3 SO2−

4 (aq) + 3 H2 (g)

[edit] Compounds

See also Category: Cerium compounds

Cerium(IV) sulfate

Cerium(IV) (ceric) salts are orange red or yellowish, whereas cerium(III) (cerous) salts are usually white or colorless. Both oxidation states absorb ultraviolet light strongly. Cerium(III) can be used to make glasses that are colorless, yet absorb ultraviolet light almost completely. Cerium can be readily detected in rare earth mixtures by a very sensitive qualitative test: addition of ammonia and hydrogen peroxide to an aqueous solution of lanthanides produces a characteristic dark brown color if cerium is present.

Cerium exhibits three oxidation states, +2, +3 and +4. The +2 state is rare and is observed in CeH2, CeI2 and CeS.[5] The most common compound of cerium is cerium(IV) oxide (CeO2), which is used as "Jeweller's rouge" as well as in the walls of some self-cleaning ovens. Two common oxidizing agents used in titrations are ammonium cerium(IV) sulfate (ceric ammonium sulfate, (NH4)2Ce(SO4)3) and ammonium cerium(IV) nitrate (ceric ammonium nitrate or CAN, (NH4)2Ce(NO3)6). Cerium also forms a chloride, CeCl3 or cerium(III) chloride, used to facilitate reactions at carbonyl groups in organic chemistry. Other compounds include cerium(III) carbonate (Ce2(CO3)3), cerium(III) fluoride (CeF3), cerium(III) oxide (Ce2O3), as well as cerium(IV) sulfate (ceric sulfate, Ce(SO4)2) and cerium(III) triflate (Ce(OSO2CF3)3).

The two oxidation states of cerium differ enormously in basicity: cerium(III) is a strong base, comparable to the other trivalent lanthanides, but cerium(IV) is weak. This difference has always allowed cerium to be by far the most readily isolated and purified of all the lanthanides, otherwise a notoriously difficult group of elements to separate. A wide range of procedures have been devised over the years to exploit the difference. Among the better ones:

  1. Leaching the mixed hydroxides with dilute nitric acid: the trivalent lanthanides dissolve in cerium-free condition, and tetravalent cerium remains in the insoluble residue as a concentrate to be further purified by other means. A variation on this uses hydrochloric acid and the calcined oxides from bastnasite, but the separation is less sharp.
  2. Precipitating cerium from a nitrate or chloride solution using potassium permanganate and sodium carbonate in a 1:4 molar ratio.
  3. Boiling rare-earth nitrate solutions with potassium bromate and marble chips.

Formerly used commercially was a method whereby a solution of cerium(IV) in nitric acid would be added to dilute sulfuric acid. This caused cerium(IV) to largely precipitate as a basic salt, leaving trivalent lanthanide in solution. However, the finely divided precipitate was difficult to filter from the highly corrosive medium. Using the classical methods of rare-earth separation, there was a considerable advantage to a strategy of removing cerium from the mixture at the beginning. Cerium typically comprised 45% of the cerite or monazite rare earths, and removing it early greatly reduced the bulk of what needed to be further processed (or the cost of reagents to be associated with such processing). However, not all cerium purification methods relied on basicity. Ceric ammonium nitrate [ammonium hexanitratocerate(IV)] crystallization from nitric acid was one purification method. Cerium(IV) nitrate (hexanitratoceric acid) was more readily extractable into certain solvents (e.g. tri-n-butyl phosphate) than the trivalent lanthanides. However, modern practice in China seems to be to do purification of cerium by counter-current solvent extraction, in its trivalent form, just like the other lanthanides.

Cerium(IV) is a strong oxidant under acidic conditions, but stable under alkaline conditions, when it is cerium(III) that becomes a strong reductant, easily oxidized by atmospheric oxygen (O2). This ease of oxidation under alkaline conditions leads to the occasional geochemical parting of the ways between cerium and the trivalent light lanthanides under supergene weathering conditions, leading variously to the "negative cerium anomaly" or to the formation of the mineral cerianite. Air-oxidation of alkaline cerium(III) is the most economical way to get to cerium(IV), which can then be handled in acid solution.

[edit] Isotopes

Main article: Isotopes of cerium

Naturally occurring cerium is composed of 4 stable isotopes; 136

Ce, 138

Ce, 140

Ce, and 142

Ce with 140

Ce being the most abundant (88.48% natural abundance). 136

Ce and 142

Ce are predicted to be double beta active but no signs of activity were ever observed (for 142

Ce, the lower limit on half-life is 5×1016

yr). 26 radioisotopes have been characterized with the most long-lived being 144

Ce with a half-life of 284.893 days, 139

Ce with a half-life of 137.640 days, and 141

Ce with a half-life of 32.501 days. All of the remaining radioactive isotopes have half-lives that are less than 4 days and the majority of these have half-lives that are less than 10 minutes. This element also has 2 meta states.

The known isotopes of cerium range in atomic weight from 123 u (123

Ce) to 152 u (152



Ce is a high-yield product of nuclear fission; the ORNL Fission Product Pilot Plant separated substantial quantities of 144

Ce from reactor waste, and it was used in the Aircraft Nuclear Propulsion and SNAP programs.

[edit] History

This section needs additional citations for verification.

Please help improve this article by adding reliable references. Unsourced material may be challenged and removed. (December 2009)

Cerium was discovered in Bastnäs in Sweden by Jöns Jakob Berzelius and Wilhelm Hisinger, and independently in Germany by Martin Heinrich Klaproth, both in 1803.[7] Cerium was named by Berzelius after the dwarf planet Ceres, discovered two years earlier (1801). As originally isolated, cerium was in the form of its oxide, and was named ceria, a term that is still used. The metal itself was too electropositive to be isolated by then-current smelting technology, a characteristic of rare earth metals in general. After the development of electrochemistry by Humphry Davy five years later, the earths soon yielded the metals they contained. Ceria, as isolated in 1803, contained all of the lanthanides present in the cerite ore from Bastnäs, Sweden, and thus only contained about 45% of what is now known to be pure ceria. It was not until Carl Gustaf Mosander succeeded in removing lanthana and "didymia" in the late 1830s, that ceria was obtained pure. Wilhelm Hisinger was a wealthy mine owner and amateur scientist, and sponsor of Berzelius. He owned or controlled the mine at Bastnäs, and had been trying for years to find out the composition of the abundant heavy gangue rock (the "Tungstein of Bastnäs"), now known as cerite, that he had in his mine. Mosander and his family lived for many years in the same house as Berzelius, and Mosander was undoubtedly persuaded by Berzelius to investigate ceria further.[8]

When the rare earths were first discovered, since they were strong bases like the oxides of calcium or magnesium, they were thought to be divalent. Thus, "ceric" cerium was thought to be trivalent, and the oxidation state ratio was therefore thought to be 1.5. Berzelius was annoyed to keep on getting the correct ratio 1.33. He was after all one of the finest analytical chemists in Europe.

In the late 1950s, the Lindsay Chemical Division of American Potash and Chemical Corporation of West Chicago, Illinois, then the largest producer of rare earths in the world, was offering cerium compounds in two purity ranges, "commercial" at 94-97% purity, and "purified", at a reported 99.9+% purity. In their October 1, 1958 price list, one-pound quantities of the oxides were priced at $3.30 or $8.10 respectively for the two purities; the per-pound price for 50-pound quantities were respectively $1.95 or $4.95 for the two grades. Cerium salts were proportionately cheaper, reflecting their lower net content of oxide.

[edit] Occurrence

See also Category: Lanthanide minerals


Cerium is the most abundant of the rare earth elements, making up about 0.0046% of the Earth's crust by weight. It is found in a number of minerals including allanite (also known as orthite)—(Ca, Ce, La, Y)2(Al, Fe)3(SiO4)3(OH), monazite (Ce, La, Th, Nd, Y)PO4, bastnasite (Ce, La, Y)CO3F, hydroxylbastnasite (Ce, La, Nd)CO3(OH, F), rhabdophane (Ce, La, Nd)PO4-H2O, zircon (ZrSiO4), and synchysite Ca(Ce, La, Nd, Y)(CO3)2F. Monazite and bastnasite are presently the two most important sources of cerium. Large deposits of monazite, allanite, and bastnasite will supply cerium, thorium, and other rare-earth metals for many years to come.[4]

[edit] Production

The mineral mixtures are crushed, ground and treated with hot concentrated sulfuric acid to produce water-soluble sulfates of rare earths. The acidic filtrates are partially neutralized with sodium hydroxide to pH 3–4. Thorium precipitates out of solution as hydroxide and is removed. After that the solution is treated with ammonium oxalate to convert rare earths in to their insoluble oxalates. The oxalates are converted to oxides by annealing. The oxides are dissolved in nitric acid that excludes one of the main components, cerium, whose salts are insoluble in HNO3. Metallic cerium is prepared by metallothermic reduction techniques, such as by reducing cerium fluoride or chloride with calcium, or by electrolysis of molten cerous chloride or other cerous halides. The metallothermic technique is used to produce high-purity cerium.[5]

[edit] Applications

A major technological application for Cerium(III) oxide is a catalytic converter for the reduction of CO emissions in the exhaust gases from motor vehicles. In particular, cerium oxide is added into Diesel fuels. Another important use of the cerium oxide is a hydrocarbon catalyst in self cleaning ovens, incorporated into oven walls and as a petroleum cracking catalyst in petroleum refining. [9]

Cerium(IV) oxide is considered one of the most efficient agents for precision polishing of optical components. Cerium compounds are also used in the manufacture of glass, both as a component and as a decolorizer. For example, cerium(IV) oxide in combination with titanium(IV) oxide gives a golden yellow color to glass; it also allows for selective absorption of ultraviolet light in glass. Cerium oxide has high refractive index and is added to enamel to make it more opaque.[9]

Cerium(IV) oxide is used in incandescent gas mantles, such as the Welsbach mantle, where it was combined with thorium, lanthanum, magnesium or yttrium oxides. Doped with other rare earth oxides, it has been investigated as a solid electrolyte in intermediate temperature solid oxide fuel cells: The cerium(IV) oxide-cerium(III) oxide cycle or CeO2/Ce2O3 cycle is a two step thermochemical process based on cerium(IV) oxide and cerium(III) oxide for hydrogen production.[10]

The photostability of pigments can be enhanced by addition of cerium. It provides pigments with light fastness and prevents clear polymers from darkening in sunlight. Television glass plates are subject to electron bombardment, which tends to darken them by creation of F-center color centers. This effect is suppressed by addition of cerium oxide. Cerium is also an essential component of phosphors used in TV screens and fluorescent lamps.[9]

A traditional use of cerium was in the pyrophoric mischmetal alloy used for light flints. Because of the high affinity of cerium to sulfur and oxygen, it is used in various aluminium alloys, and iron alloys. In steels, cerium degasifies and can help reduce sulfides and oxides, and it is a precipitation hardening agent in stainless steel. Adding cerium to cast irons opposes graphitization and produces a malleable iron. Addition of 3–4% of cerium to magnesium alloys, along with 0.2 to 0.6% zirconium, helps refine the grain and give sound casting of complex shapes. It also adds heat resistance to magnesium castings.[9]

Cerium alloys are used in permanent magnets and in tungsten electrodes for gas tungsten arc welding. Cerium is used in carbon-arc lighting, especially in the motion picture industry. Cerium oxalate is an anti-emetic drug. Cerium(IV) sulfate is used extensively as a volumetric oxidizing agent in quantitative analysis. Ceric ammonium nitrate is a useful one-electron oxidant in organic chemistry, used to oxidatively etch electronic components, and as a primary standard for quantitative analysis.[4][11]

[edit] Precautions

Cerium, like all rare-earth metals, is of low to moderate toxicity. Cerium is a strong reducing agent and ignites spontaneously in air at 65 to 80 °C. Fumes from cerium fires are toxic. Water should not be used to stop cerium fires, as cerium reacts with water to produce hydrogen gas. Workers exposed to cerium have experienced itching, sensitivity to heat, and skin lesions. Animals injected with large doses of cerium have died due to cardiovascular collapse. Cerium(IV) oxide is a powerful oxidizing agent at high temperatures and will react with combustible organic materials. While cerium is not radioactive, the impure commercial grade may contain traces of thorium, which is radioactive. Cerium serves no known biological function.[9]



歡迎來到Bewise Inc.的世界,首先恭喜您來到這接受新的資訊讓產業更有競爭力,我們是提供專業刀具製造商,應對客戶高品質的刀具需求,我們可以協助客戶滿足您對產業的不同要求,我們有能力達到非常卓越的客戶需求品質,這是現有相關技術無法比擬的,我們成功的滿足了各行各業的要求,包括:精密HSS DIN切削刀具協助客戶設計刀具流程DIN or JIS 鎢鋼切削刀具設計NAS986 NAS965 NAS897 NAS937orNAS907 航太切削刀具,NAS航太刀具設計超高硬度的切削刀具醫療配件刀具設計複合式再研磨機PCD地板專用企口鑽石組合刀具粉末造粒成型機主機版專用頂級電桿PCBN刀具PCD刀具單晶刀具PCD V-Cut捨棄式圓鋸片組粉末成型機航空機械鉸刀主機版專用頂級電汽車業刀具設計電子產業鑽石刀具木工產業鑽石刀具銑刀與切斷複合再研磨機銑刀與鑽頭複合再研磨機銑刀與螺絲攻複合再研磨機等等。我們的產品涵蓋了從民生刀具到工業級的刀具設計;從微細刀具到大型刀具;從小型生產到大型量產;全自動整合;我們的技術可提供您連續生產的效能,我們整體的服務及卓越的技術,恭迎您親自體驗!!

BW Bewise Inc. Willy Chen willy@tool-tool.com bw@tool-tool.com www.tool-tool.com skype:willy_chen_bw mobile:0937-618-190 Head &Administration Office No.13,Shiang Shang 2nd St., West Chiu Taichung,Taiwan 40356 http://www.tool-tool.com/ / FAX:+886 4 2471 4839 N.Branch 5F,No.460,Fu Shin North Rd.,Taipei,Taiwan S.Branch No.24,Sec.1,Chia Pu East Rd.,Taipao City,Chiayi Hsien,Taiwan

Welcome to BW tool world! We are an experienced tool maker specialized in cutting tools. We focus on what you need and endeavor to research the best cutter to satisfy users demand. Our customers involve wide range of industries, like mold & die, aerospace, electronic, machinery, etc. We are professional expert in cutting field. We would like to solve every problem from you. Please feel free to contact us, its our pleasure to serve for you. BW product including: cutting toolaerospace tool .HSS DIN Cutting toolCarbide end millsCarbide cutting toolNAS Cutting toolNAS986 NAS965 NAS897 NAS937orNAS907 Cutting Tools,Carbide end milldisc milling cutter,Aerospace cutting toolhss drillФрезерыCarbide drillHigh speed steelCompound SharpenerMilling cutterINDUCTORS FOR PCD’CVDD(Chemical Vapor Deposition Diamond )’PCBN (Polycrystalline Cubic Boron Nitride) Core drillTapered end millsCVD Diamond Tools Inserts’PCD Edge-Beveling Cutter(Golden FingerPCD V-CutterPCD Wood toolsPCD Cutting toolsPCD Circular Saw BladePVDD End Millsdiamond tool. INDUCTORS FOR PCD . POWDER FORMING MACHINE Single Crystal Diamond Metric end millsMiniature end millsСпециальные режущие инструментыПустотелое сверло Pilot reamerFraisesFresas con mango PCD (Polycrystalline diamond) ‘FresePOWDER FORMING MACHINEElectronics cutterStep drillMetal cutting sawDouble margin drillGun barrelAngle milling cutterCarbide burrsCarbide tipped cutterChamfering toolIC card engraving cutterSide cutterStaple CutterPCD diamond cutter specialized in grooving floorsV-Cut PCD Circular Diamond Tipped Saw Blade with Indexable Insert PCD Diamond Tool Saw Blade with Indexable InsertNAS toolDIN or JIS toolSpecial toolMetal slitting sawsShell end millsSide and face milling cuttersSide chip clearance sawsLong end millsend mill grinderdrill grindersharpenerStub roughing end millsDovetail milling cuttersCarbide slot drillsCarbide torus cuttersAngel carbide end millsCarbide torus cuttersCarbide ball-nosed slot drillsMould cutterTool manufacturer.

Bewise Inc. www.tool-tool.com

ようこそBewise Inc.の世界へお越し下さいませ、先ず御目出度たいのは新たな






(2)Carbide Cutting tools設計














Bewise Inc. talaşlı imalat sanayinde en fazla kullanılan ve üç eksende (x,y,z) talaş kaldırabilen freze takımlarından olan Parmak Freze imalatçısıdır. Çok geniş ürün yelpazesine sahip olan firmanın başlıca ürünlerini Karbür Parmak Frezeler, Kalıpçı Frezeleri, Kaba Talaş Frezeleri, Konik Alın Frezeler, Köşe Radyüs Frezeler, İki Ağızlı Kısa ve Uzun Küresel Frezeler, İç Bükey Frezeler vb. şeklinde sıralayabiliriz.

BW специализируется в научных исследованиях и разработках, и снабжаем самым высокотехнологичным карбидовым материалом для поставки режущих / фрезеровочных инструментов для почвы, воздушного пространства и электронной индустрии. В нашу основную продукцию входит твердый карбид / быстрорежущая сталь, а также двигатели, микроэлектрические дрели, IC картонорезальные машины, фрезы для гравирования, режущие пилы, фрезеры-расширители, фрезеры-расширители с резцом, дрели, резаки форм для шлицевого вала / звездочки роликовой цепи, и специальные нано инструменты. Пожалуйста, посетите сайт www.tool-tool.com для получения большей информации.

BW is specialized in R&D and sourcing the most advanced carbide material with high-tech coating to supply cutting / milling tool for mould & die, aero space and electronic industry. Our main products include solid carbide / HSS end mills, micro electronic drill, IC card cutter, engraving cutter, shell end mills, cutting saw, reamer, thread reamer, leading drill, involute gear cutter for spur wheel, rack and worm milling cutter, thread milling cutter, form cutters for spline shaft/roller chain sprocket, and special tool, with nano grade. Please visit our web www.tool-tool.com for more info.